| Page: 1 | Rating: Unrated [0] |
Yer Grounded!! Help Please.
| Good [+1]Toggle ReplyLink» MURDOCK_ROCK replied on Fri Jul 7, 2006 @ 3:37pm |
 Coolness: 84785 | my mixer is being repaired and i got a buncha new records and i wanna sift through em...
whats an easiest way i could ground a turntable without it? |
| Good [+1]Toggle ReplyLink» Screwhead replied on Fri Jul 7, 2006 @ 4:37pm |
 Coolness: 686500 | It's not just the grounding of the turntables you'll need to worry about, you need a phono preamp
RIAA equalisation is a special form of equalisation that is employed when creating vinyl recordings and cuts lower frequencies in the process. This is used to reduce wide grooves that are difficult for a turntable stylus to follow and also increases the recording time available on a vinyl disc. The RIAA curve is a set standard for frequency response of filters used when playing back vinyl recordings, used to restore lower frequencies that were reduced at the recording stage.
So your records, if you hook up the thing without a proper phono pre-amp, will have zero bass and will only be mids and highs. |
| Good [+1]Toggle ReplyLink» MURDOCK_ROCK replied on Fri Jul 7, 2006 @ 4:57pm |
| Coolness: 84785 | BASTERDS!!!
why do they have to take so fuckin' long to fix my x-fader!!!!!!! i wonder if my old hi fi still works? |
| Good [+1]Toggle ReplyLink» Screwhead replied on Fri Jul 7, 2006 @ 5:02pm |
| Coolness: 686500 | lol man you shoulda just ordered a new one and replaced it yourself. It's like, a few screws and a plug. It'd take the average person who's never touched any kinds of electronics like 5 minutes to do without instructions.. |
| Good [+1]Toggle ReplyLink» flo replied on Fri Jul 7, 2006 @ 5:04pm |
 Coolness: 147235 | maybe with a proper enough soundcard and a RCA adapter you'll be able to amplify and equalize it in your computer... my 2 cents idea |
| Good [+1]Toggle ReplyLink» MURDOCK_ROCK replied on Fri Jul 7, 2006 @ 5:24pm |
| Coolness: 84785 | i can change a fader like no problemo...
thing is it might actually be a problem with the kill/ punch buttons that work in conjuction with the fader. im sure i could fix it... but if i did it myself i'd have to pay for it and void my waranty. |
| Good [+1]Toggle ReplyLink» soyfunk replied on Fri Jul 7, 2006 @ 10:35pm |
 Coolness: 127680 | you can't just plug it into an old stereo tuner with phono input?
or am i the only one that still has old stuff like that they're like 20$ at an east side pawnshop |
| Good [+1]Toggle ReplyLink» El_Presidente replied on Sat Jul 8, 2006 @ 5:59am |
 Coolness: 300235 | fuck the RIAA |
| Good [+1]Toggle ReplyLink» Mike_Stinger replied on Sun Jul 9, 2006 @ 6:52pm |
 Coolness: 52150 | can you get just a little free standing phono preamp with a line level out? i could use one of these... |
| Good [+1]Toggle ReplyLink» MURDOCK_ROCK replied on Mon Jul 10, 2006 @ 9:48am |
| Coolness: 84785 | i dug out my old hi fi... its ghetto i don't even have speakers for it that aren't powered... i had to hook up my monitor from the record out and control the volume from the back of my speaker...
it did the job. but i miss my mixer like a piece of good pussy. |
| Good [+1]Toggle ReplyLink» Screwhead replied on Tue Jul 11, 2006 @ 2:53pm |
| Coolness: 686500 | Originally posted by MIKE STINGER...
can you get just a little free standing phono preamp with a line level out? i could use one of these... There's a ton of 'em. You won't find 'em at Future Shop or anything like that, but you can probably get one at some specialised hi-end audio stores. I know that at the hifi components show that happens every year they've usually got some for like 50 bucks depending on the person selling/brand. They also make some that have a USB soundcard built in so you can just hook it up direct to the computer. |
Yer Grounded!! Help Please.
| Page: 1 |
[ Top Of Page ] |
Post A Reply |
You must be logged in to post a reply.
[ Top Of Page ] |
